TRENDnet TEG-S3000I - Manual (Page 104)

102
8. To set the outgoing frames are VLAN-Tagged frames or untagged. Then click
Apply .
„ Tag: outgoing frames with VLAN-Tagged.
„ Untag: outgoing frames without VLAN-Tagged.
„ Port VID: Configure port VID settings
1. Port VLAN ID: enter the port VLAN ID.
2. Ingress Filtering: Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN.
„ Enable: Forward only packets with VID matching this port's configured VID.
„ Disable: Disable Ingress filter function
3. Acceptable Frame type:
„ Tag Only: Only packet with match VLAN ID can be permission to go through
the port.
„ ALL: Acceptable all Packet
4. VLAN ID Range: select a range of VLAN ID. There are 16 VLAN ID range. The
ports are assigned to the same VLAN ID will be in the same VLAN group.
5. Click Apply .
6. To reset back to default value, click Default button.
Formatted: Bullets and Numbering