Toshiba IK-WB30A - Manual (Page 60)

60
Audio and Video
This section explains how to configure the audio and video settings of the Network Camera. It is
composed of the following two columns: Video Settings and Audio Settings.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
Iris mode: Select a proper iris mode for your environment.
■ Fixed: Mode for manual iris lens. Open the lens iris at any time. Exposure time will be controlled
automatically for all use. (If connected Auto Iris Lens, lens iris will be opened automatically.)
■ Indoor: Mode for DC Auto Iris lens. Lens iris and exposure time will be controlled automatically for
indoor use.
■ Outdoor: Mode for DC Auto Iris lens. Lens iris and exposure time will be controlled automatically for
outdoor use.
Select caching stream: This Network Camera supports time shift cache stream on the Network Camera.
Select one stream and check the below option Enable time shift caching stream.
Video Title
Title and Time
Video 17:08:56 2010/01/15
2010/01/15 17:08:56