Toshiba IK-WB30A User Manual
Page 59
59
Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List.
For example:
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. This rule is
only applied to IPv4.
For example:
■ Delete Allowed/Denied list:
In the Delete Allowed List or Delete Denied List column, make a selection and click Delete.
●
For example, when the range of IP addresses on the allowed list is set from 1.1.1.0 to 192.255.255.255
and the range in the denied list is set from 1.1.1.0 to 170.255.255.255, only users’ IPs between
171.0.0.0 and 192.255.255.255 can access the Network Camera.
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s
IP address in this field to make sure the Administrator can always connect to the device.
Allowed
List
Denied
List
IP address 192.168.2.x will be bolcked.
NOTE