Toshiba IK-WB30A User Manual
Page 46
46
Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your web browser.
3. The format should be:
4. Press Enter on the keyboard or click Refresh button to refresh the webpage.
For example:
●
If you have a Secondary HTTP port (the default value is 8080), you can also link to the webpage in
the following address format: (Please refer to HTTP on page 51 for detailed information.)
●
If you choose PPPoE as the Network Type, the [
PPP0
address] will be displayed in the IPv6
information column as shown below.
Manually setup the IP address: Select this option to manually set up IPv6 settings if your network
environment does not have DHCPv6 server and router advertisements-enabled routers.
If you check this item, the following blanks will be displayed for you to enter the corresponding
information:
http://
[
2001:0c08:2500:0002:0202:d1ff:fe04:65f4
]
/
IPv6 address
http://
[
2001:0c08:2500:0002:0202:d1ff:fe04:65f4
]
/
:8080
IPv6 address
Secondary HTTP port
NOTE