Toshiba IK-WB30A - Manual (Page 58)

58
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
to deny access. Please note that those checked connections will only be disconnected temporarily
and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the
denied list, please check Enable access list filtering and click Save in the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button. Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again.
Enable access list filtering: Check this item and click Save if you want to enable the access list filtering
function.
Filter
There are two lists for permission control: Allowed list and Denied list. Only those clients whose IP
addresses are on the Allowed list and not on the Denied list can access the Network Camera. Please
note that the IPv6 access list column will not be displayed unless you enable IPv6 on the Network page.
For more information about IPv6 Settings, please refer to page 45 for detailed information.
■ Add a rule to Allowed/Denied list: Click Add to add a rule to Allowed/Denied list.
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list.
For example: