Providing power – Texas Instruments 3000 WinSX User Manual
Page 48
Providing Power
Connect the AC Adapter to your TravelMate 3000 WinSX as follows.
1.
Set the computer's power switch to the off
position.
2.
Connect the female connector of the supplied ac cord to the inlet on the
AC Adapter body.
Note:
Do not remove the female connector from the AC Adapter while the AC Adapter
is connected to the computer.
3.
Connect the male end of the ac cord into a grounded wall receptacle of
the correct voltage. Use a grounded plug adapter if necessary.
4.
Holding the round mini-DIN jack from the AC Adapter so that the
arrow embossed on the connector faces up, press the connector into the
matching jack on the rear panel of the computer.
Note:
For best air circulation, set the AC Adapter on your work surface on its short
side with the indicator lights up.
Getting Started 3-7