Texas Instruments 3000 WinSX - Manual (Page 170)

Error Messages
Non-System disk or Floppy in drive A not a
disk error. Replace and bootablefloppy - Replace
press any key when the floppy in drive A with a
ready bootable floppy. When for-
matting MS-Dos bootable
floppies, be sure to add the
/S option to the FORMAT com-
mand (see your MS-DOS
User's Guide and Reference).
Time-of-day not set Failed RTC chip - Reset the
time and date on the Setup
Program (see Chapter 4).
Informational Messages
The following informational messages do not necessarily indicate a problem or failure, but
are provided by the computer to inform you.
NNN Main memory, This message lists the
NNN Extended amount of standard memory
and optional extended
memory that has tested suc-
cessfully.
Memory tests ter- This message informs you
minated by keystroke that you pressed the Space
Bar while memory tests were
running; this stops the tests.
Press the F1 key to This message indicates that
continue an error was found during
the power-up tests. Press
the F1 key to cause the sys-
tem to attempt to boot.
Troubleshooting E-9