Texas Instruments 3000 WinSX - Manual (Page 111)

RAM Modules
The standard TravelMate 3000 WinSX Notebook Computer is equipped with 4 MB of
main memory (RAM). If you need more RAM capacity, you can install four more RAM
modules (TI Part No. 2566996-0001) to increase total main memory to 6 MB.
Installing the RAM Modules
To install the RAM modules, you need only a small, flatblade screwdriver. Installing the
RAM modules involves removing the keyboard, Installing the modules, and replacing the
keyboard. Read this procedure before starting and, if you do not feel comfortable doing
the steps, contact your Texas Instruments dealer.
Removing the Keyboard
Remove the keyboard from the computer case as follows.
1. Turn off computer power, disconnect the AC Adapter, and disconnect
any external devices and cables connected to the computer.
2. Carefully insert the blade of a small, flat-blade screwdriver about 1/4
inch into the leftmost of three slots, behind the F1 key and between the
keyboard and the computer case as shown in the figure.
TravelMate 3000 WinSX Options 6-3