Tascam HS-4000 - Manual (Page 65)

TASCAM HS-4000
65
9 – Playlist mode
Editing the playback starting point
1. Press the HOME key on the front panel to open the
Home screen.
2. Touch a file name or title name button display and then
touch the ADJUST ENTRY button in the pull-down menu to
open the ADJUST ENTRY XXX screen. (“ XXX ” is the entry
number.)
NOTE
You can also open this screen by touching the MENU button and then
touching the ADJUST button in the pull-up menu when a take is selected on
the ENTRY list screen or one of the key assign buttons on the left is selected on
the ASSIGN file screen.
Entry List Screen
Assign File Screen
3. The Start Point value shown for the Start End
Point item is the playback start point for the
selected entry. Press the EDIT button for the Start
Point to open the EDIT START POINT screen where
you can change the playback start point.
Use the FRAME EDIT button on the EDIT START POINT
screen to set whether or not you will edit the frame value.
4. Use the number buttons to input the playback start
point for the entry.
・ If you begin input without selecting a digit, input will start
from the smallest one.
・ To input a specific digit, touch it to make its background
yellow, and then use the number buttons or the DATA
dial to enter two digits at a time.
・ Touch the CURRENT ▼ button to copy the current
playback position to the input value.
・ Touch the CLEAR button to erase all entered values.
・ Touch the Mark List button to open the mark list
screen where you can copy the time from a designated
mark.
On this screen, press the e button of a mark to copy its
time to the playback start point and return to the
ADJUST ENTRYXXX screen.
NOTE
If the entry that you are trying to edit is currently playing, when you touch the
e button, a “ Cannot change now. Currently Playing ” message
appears, and you will not be able to change the playback start point. Stop
playback before touching the
e button.
5. Touch the ENTER button to confirm the setting.
NOTE
If the entry that you are trying to edit is currently playing, when you touch the
Enter button, a “ Cannot change now. Currently Playing ” message
appears, and you will not be able to change the playback start point. Stop
playback before touching the
Enter button.
TIP
・ You can also use the PLAY key and other transport keys while listening
to the audio to find the location, and then press the CURRENT
button to input that value here.
・ This can also be edited using an externally connected keyboard.
・ Press the keyboard’s ESC key to clear all the values.