Toshiba E-STUDIO 3511 - Manual (Page 89)

87
3
Hole Punch Mode (Optional)
When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole
punch your copies.
* The paper weight should be in the range of 17 lb. Bond to 110 lb. Index. Special paper such as OHP files
or labels is excluded.
1 Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
- When using this mode in bypass copying ("Bypass Copying"
Page 60), be sure to specify the paper size.
2 Place the original(s).
- "2.SETTING ORIGINALS" Page 47
3 Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
4 Press the [HOLE PUNCH] button.
z Select other copy modes as required.
5 Press the [START] button.
Available paper sizes for the hole punch:
Since the number of punch holes and the distance between the
holes vary depending on the country, purchase a hole punch unit
that meets your requirements. (For details, consult your service
technician.)
* The paper mentioned above is Toshiba-recommended paper.
Specifications and appearance are subject to change without
notice in the interest of product improvement
Number of punch holes and hole
diameter
Available paper size
North America
(MJ-6004N) 2/3 holes switchable
(0.315” dia.) 2 holes: LG, LT-R, A4-R
3 holes: LD, LT, A3, A4