Toshiba E-STUDIO 3511 - Manual (Page 56)

54
2.HOW TO MAKE COPIES
3.GENERAL COPYING PROCEDURES (Cont.)
2
2 Place the original(s).
- "Acceptable Original Types and Sizes/Maximum Number of
Sheets that can be Stored" Page 47
- "When Placing an Original on the Glass" Page 48
- "When Using the Reversing Automatic Document Feeder
(optional)" Page 50
When the reversing automatic document feeder (optional) is
installed and the single feed mode is selected, place the original(s)
after the copy mode is set.
3 Select the copy modes as required.
- Copy modes cannot be changed after the [START] button is
pressed (including the case when originals are divided into
multiple sets when fed).
- Selecting multiple copy modes may be restricted depending on
their combination.
4 Press the [START] button.
- Copying starts.
To copy the original, which is placed on the original glass, after
scanning and storing it in the memory (sort mode, 1-side original to
2-sided copies, etc.), follow step 5 and 6.