Toshiba E-STUDIO 3511 - Manual (Page 114)

112 5.USING THE EDITING FUNCTIONS
5
3. BOOK CENTER ERASE
This feature allows you to erase the shadow in the center of a book original.
1: Before
2: After the book center has been erased
1 Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
- When using this mode in bypass copying ("Bypass Copying"
Page 60), be sure to specify the paper size.
2 Place the original(s).
- "2.SETTING ORIGINALS" Page 47
3 Press the [EDIT] button to enter the edit
menu, and then press the [BOOK CENTER
ERASE] button.
4 Adjust the width of the book center erase
margin, and then press the [ENTER]
button.
- The default width of the book center erase margin is 10 mm
(0.393”).
- To adjust the width, press the [2 mm] or [50 mm] button to select
the desired number, and then press the [ENTER] button.
z Select other copy modes as required.
5 Press the [START] button.
1 2