Toshiba E-STUDIO 3511 User Manual

Page 52

2.HOW TO MAKE COPIES

2.SETTING ORIGINALS (Cont.)

When Using the Reversing Automatic Document Feeder (optional)

Precautions for Using the Reversing Automatic Document Feeder

Do not use the following type 1 to 8 of originals as they may misfeed or become damaged:
1 : Only originals with the same width can be set at a time. (Do not mix originals with different widths.)
2 : Badly wrinkled or folded originals; in particular, originals whose leading edge is curled may fail to be

correctly fed.

3 : Originals with carbon paper
4 : Taped, pasted or clipped (cut out) originals
5 : Clipped or stapled originals
6 : Originals with holes or tears ones
7 : Damp originals
8 : OHP film originals

* Do not use tracing paper, permeable paper and coating paper (coating with wax, etc.).

Also, the following type 9 and 10 of originals should be handled carefully:

9 : Originals, 2 of which, when pinched between 2 fingers, cannot be moved, or originals that are surface-

treated may fail to separate properly.

10: Folded or curled originals should be smoothed before being used.

* The different sized originals are limited for setting. "Mixed-sized Originals" Page 72

If the scanning area and guide area are dirty, it may cause black streaks, etc. on the printed paper. Cleaning
them preferably once a week is recommended. See "Weekly Maintenance" Page 288