Toshiba E-STUDIO 3511 - Manual (Page 268)

266
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL
5.CLEAR PAPER SYMBOL (Cont.)
12
9. Paper Misfeed in the Hole Punch Unit (optional)
1 Open the front cover of the hole punch
unit (optional).
2 Raise the Hole Punch Unit.
3 Rotate the green knob to locate the arrow
within the area on the label.
- Under this condition, the punchers are up, allowing the paper
shown in the illustration to be removed.
- If the misfed paper still remains, open the upper cover of the
finisher to remove it.
4 Return the hole punch unit to the original
position and close the front cover.