Toshiba E-STUDIO 3511 - Manual (Page 101)

99
4
2. RGB ADJUSTMENT
This function allows you to adjust the color balance by changing the strength of Red (R), Green (G) and
Blue (B) at the time of scanning original.
It is available only in the full color mode.
1 Place paper in the drawer(s).
- "1.SETTING COPY PAPER" Page 38
2 Place the original(s).
- "2.SETTING ORIGINALS" Page 47
3 Press the [IMAGE] button to enter the
image menu, and then press the [RGB
ADJUSTMENT] button.
4 Press the or button to adjust the
color balance.
- Pressing the button enhances the tint of the color, while
pressing the button decreases the tint of the color.
5 Press the [ENTER] button.
z Select other copy modes as required.
6 Press the [START] button.
Canceling the RGB Adjustment
There are 2 ways for clearing the setting.
- Press the or button on the column you want to cancel to
move the indicator to 0, then press the [ENTER] button.
- If you want to cancel all the 3 adjustments, press the [DEFAULT]
button, and then press the [ENTER] button.