Toshiba E-STUDIO 3511 - Manual (Page 49)

47
2
2. SETTING ORIGINALS
Acceptable Original Types and Sizes/Maximum Number of Sheets that can be Stored
Acceptable Original Types and Sizes
* When the original of A/B format is placed on the glass, the automatic detection may not work correctly.
Maximum number of sheets (all sizes) that can be set in the reversing automatic document feeder
(optional): 100 sheets (13.3-20 lb.) or less than 0.6” in height.
Maximum Number of Sheets that can be Stored
Up to 1,000 sheets of LT size can be stored per 1 job during copy, or until the memory becomes full.
When exceeding the above limit during the scanning, the following screen is displayed. The scanned data
is printed by pressing the [YES] button and it is deleted by pressing the [NO] button.
Setting place Types of originals Maximum size Sizes capable of automatic detection
Glass
*1
*1.Do not place any heavy object (9 lb. or over) on the glass.
Sheets
3-dimensional objects
Books Width:11.69”
Length:17.01” (Standard size)
LT format: LD, LG, LT, LT-R, ST-R
A/B format:
A3 (297 x 420 mm), A4 (297 x 210 mm),
A4-R (210 x 297 mm),
A5-R (148 x 210 mm), B4 (257 x 364 mm),
B5 (257 x 182 mm), B5-R (182 x 257 mm),
Reversing
automatic
document
feeder
(optional)
*2
*2.Even if listed under “Types of originals”, some of the originals may not be used depending on paper quality.
Plain paper Recycled
paper: 13.3- 33.8 lb.
(1-sided Original)
13.3-27.9 lb.
(2-sided Original) Width:11.69”
Length:17.01” (Standard size)
LT format:
LD, LG, LT, LT-R, ST-R, COMP
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R,
FOLIO (210 x 330 mm)
*3
*3.Automatic detection cannot be worked when the different paper formats are mixed.