beautypg.com

Led indications, How to clean the air filter (cont.) – Toshiba 57HLX82 User Manual

Page 64

background image

Intr

oduction

Connecting

y

our T

V

Using the

Remote Contr

ol

Setting up

y

our T

V

Using the T

V’s

F

eatur

es

Appendix

Index

64

LED indications

The green and red LED lights on the TV control
touchpad (on the lower right corner of the TV screen)
indicate the TV’s current status, as follows:
• Green ON = Control touchpad being pressed.
• Red ON = Power ON.
• Green and/or Red blinking (see table below for

condition and solution).

6.

Reattach the outer and
inner plastic covers
around the air filter.

5.

Using a small-diameter vacuum cleaner attachment, carefully
vacuum both sides of the air filter.

Note:
Never use a large diameter vacuum cleaner attachment to clean

the air filter, or the air filter may get caught in the vacuum cleaner.

Never use water or other liquids to clean the air filter, or the air filter

may become damaged.

Air filter

Small-diameter vacuum
cleaner attachment

LED Indication

Condition

Solution

1) Green and Red blink

The lamp unit door is not seated

Turn the POWER OFF and unplug the power cord. Review

at 0.3-second intervals.

properly.

“How to replace the lamp unit” on pages 60–62 to ensure
that the lamp unit door is installed securely. If the problem
persists, contact a Toshiba Authorized Service Center.

2) Green blinks at 0.3-second The lamp is not working properly. The TV automatically will try to reset itself three times.

intervals; Red lights solid.

3) Green and Red blink

EITHER: The lamp is not

Turn the POWER OFF and then ON again. If the problem

at 1-second intervals.

working properly after the third

persists, replace the lamp unit (see pages 60–62). If the problem

automatic reset (see item #2).

still persists, contact a Toshiba Authorized Service Center.

OR: A cooling fan is not working

Turn the POWER OFF and then ON again. If the problem

properly.

persists, contact a Toshiba Authorized Service Center.

Green indicator

TV control touchpad

7.

With the outer plastic cover of the air filter housing facing the
TV
, gently reinsert the air filter assembly into the TV’s air filter
cavity.

8.

Reattach the air filter door, and replace the two thumb screws by
hand (review step 2).

Outer plastic cover

Air filter

Inner plastic cover

Air filter housing

MENU

VOLUME

CHANNEL

EXIT

TV/VIDEO

POWER

Red indicator

How to clean the air filter (cont.)

NOTE:

Make sure the air filter door and screws are

installed correctly; otherwise, the TV may not turn on and

excessive dust may enter and damage the TV.

57HLX82(E)59-70

10/29/02, 10:29 AM

64