Telit Wireless Solutions GE863 - Manual (Page 36)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
ERROR some error occurred Enable extended result codes
(see par. 2.5.2.1), and retry.
+CME ERROR: 10 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CMS ERROR: 310 SIM not present Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CME ERROR: 11 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CMS ERROR: 311 SIM is present and PIN is
required to continue operations insert SIM PIN (see par.
2.5.2.3)
+CME ERROR: 12 SIM is present and PUK is
required to continue operations insert SIM PUK (see
par.2.5.2.4)
+CMS ERROR: 316 SIM is present and PUK is
required to continue operations insert SIM PUK (see
par.2.5.2.4)
+CME ERROR: 13 SIM defect Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CMS ERROR: 313 SIM defect Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CME ERROR: 14 SIM is busy retry later
+CMS ERROR: 314 SIM is busy retry later
+CME ERROR: 15 SIM is wrong type Check SIM, it must be a GSM
SIM.
+CMS ERROR: 315 SIM is wrong type Check SIM, it must be a GSM
SIM.
+CME ERROR: 21 invalid index Change index number or leave
it empty and retry.
+CME ERROR: 20 memory full PB storage is full.
+CMS ERROR: 322 memory full PB storage is full.
For example:
1- Let's assume you want to select the "SM" normal phonebook for operations,
command:
AT+CPBS="SM"
response
OK
- Now you might want to write a new record on the PB:
command:
AT+CPBW=,"0404192123",129,"NewRecord"
response:
OK
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 36 of 109