Telit Wireless Solutions GE863 - Manual (Page 34)

GE863-GPS Software User Guide
1vv0300724 Rev. 2 - 24/01/07
command:
AT+CPBF="FA"
the response may look like:
+CPBF= 7,"+39404192369",145,"Fabio"
+CPBF= 9,"0404192111",129,"Fabrizio"
OK
- Now you might want to look for the entries with the name starting with: "FAUSTO" but no record
contains this name:
command:
AT+CPBF="FAUSTO"
response:
+CME ERROR: 22
or if extended error codes are disabled simply
response:
ERROR
3.1.3 Phonebook entry read by Index
As first thing, you must select the desired storage as active (see par.3.1.1.1). Then:
•
send command
AT+CPBR=
where:
is the index number of the desired PB record to be read.
•
wait for response in the format:
+CPBR= ,"",,""
OK
where:
is the record number on the PB;
is the phone number;
is the type of number:
145 – international numbering scheme
129 – national numbering scheme
is the alphanumeric name associated with the number.
or in the case the index number does not correspond to a written record:
+CME ERROR: 22 or simply ERROR.
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 34 of 109