Assembly – Tiger Products Co., Ltd CNH T6010-80 User Manual
Page 63
ASSEMBLY
Assembly Section 2-31
Arrange the hoses in the clamp that attaches to the boom mounting bracket as shown above,
with the 1” motor hoses closest to the bracket and the return hose closest to the boom arm. Pull
the hoses snug from the swivel to the mounting bracket clamps, when main boom is still forward,
and tighten the hoses in the clamp.
Make sure the 1” motor hoses do not kink as the boom arm is moved into the stowing
position. If this happens the motor hoses will have to be shortened, because there is too much
hose between clamps.
(ASM-BRUTE HOSE ROUTING-0001)