Tiger Products Co., Ltd CNH T6010-80 - Manual (Page 125)

MAINTENANCE
Boom Maintenance Section 4-5
©2011 Alamo Group Inc.
MAINTENANCE
WEEKLY OR EVERY 40 HOURS
ITEM SERVICE COMMENTS
Rotary Spindle Lubricate Every 40 hours or weekly
WEEKLY OR EVERY 50 HOURS
ITEM SERVICE COMMENTS
In Tank Hyd. Fluid Change Change after first 50
Filter hours only, then every
10 micron filter) 500 hours or yearly
In-Line High Pressure Change Change after first 50
Filter hours only, then every
(10 micron filter) 500 hours or yearly
MONTHLY OR EVERY 150 HOURS
ITEM SERVICE COMMENTS
Hydraulic Fluid Level Check Add as needed
Hyd. Tank Breather Clean/Check/Replace Clean or replace
Element as required
Rear Tire Type Max P.S.I.
480/80R38 29
18.4-34 26
18.4-38 26
YEARLY OR EVERY 500 HOURS
ITEM SERVICE COMMENTS
Spindle Grease Change
Hyd. Tank Fluid Change
In Tank Hyd. Fluid Filter Change
(10 micron filter)
In-Line HP Filter Change or Change when indicated
(10 micron filter) by restriction indicator.
Hyd. Tank Breather Change