Tiger Products Co., Ltd CNH T6010-80 - Manual (Page 52)

ASSEMBLY
Assembly Section 2-20
*NOTE ON HUSCO CONTROL VALVES*
Manual, cable controlled (Husco control valve) boom mowers require check valves with inte-
gral restricting orifice (#06502036) installed in the control valve work ports that are connected to
the gland ends of the main and secondary boom cylinders. This check valve allows oil to free
flow into the gland end of the main and secondary boom cylinders, but restricts flow out of the
cylinder, thereby providing proper boom control. This check valve, #06502036(Vendor #1968R-
.063) is similar in appearance to hose adapter #33271 and Adapter #34396, with.06 orifice.
These components can be identified as follows, and are to be installed per parts section for the
lift valve.
(ASM-HUSCO-0001)