Assembly, High pressure filter, Switch box mounting (joystick) – Tiger Products Co., Ltd CNH T6010-80 User Manual
Page 57
ASSEMBLY
Assembly Section 2-25
HIGH PRESSURE FILTER
(JYSTCK CONTROL)
The high pressure filter is mounted to the right valve mounting bracket with hardware, as
shown in the parts section. Attach the two adapters to the filter. The pressure line from the trac-
tor is plumbed to the left (Inlet) side of the filter. The pressure hose that is attached to the right
side of the filter is routed to the “P” port of the priority valve.
(ASM-C-0032)
SWITCH BOX MOUNTING (JOYSTICK)
Locate the 2 holes in the right front corner of the cab frame. These will be the mounting holes
for the 2 mounting bolts of the switch box bracket. Mount the bracket using the hardware sup-
plied, as noted in the Parts Section.
(ASM-NH-0060)