Toshiba DKT2104-CT - Manual (Page 98)

Appendix
Access Codes
86
Strata DKT2104-CT Cordless Digital Telephone 5/00
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have
&2
or
/LQH
, you can enter a code, listed in Table 6 , to access an outside line.
You can also store the code on 6' for one-touch access. Enter before the CO
access code (e.g., to store code , enter ). See your System
Administrator for the code that applies to your telephone.
Note In some systems is used as a general group code or to access LCR. You are
required to dial in order to access the outside line. In a system programmed
with LCR, you may not hear internal dial tone, depending on system
programming.
➤ Press [PDN] + CO Line access code.
Feature Access Codes
Refer to the list of codes on Page 86 .
Table 6 CO Line Access Codes
System CO Line Access Codes
DK14 or
1 a
or
2 a
1. Accesses line groups 1~16.
2. Accesses individual lines 1~200.
DK16e or a or a
DK40, DK40i or a or a
DK424 (RCTUA) or ~ or
a
DK424 (RCTUBA/BB) and
DK424i (B1CU)
or ~ or a
DK424 (RCTUC/D) and
DK424i (B2CAU/B2CBU)
(B3CAU/B3CBU)
or a or a
DK424 (RCTUE/F) and
DK424i (B5CAU/B5CBU)
or a or a