Toshiba DKT2104-CT - Manual (Page 67)

Features
Calls on Hold
Strata DKT2104-CT Cordless Digital Telephone 5/00
55
Calls on Hold
Calls on hold can be released automatically if the held party hangs up and the network
provides a hold-release signal.
Important! The DKT2104-CT does not support Exclusive Hold.
Placing Line Appearances or [DN] Calls on Hold
Placing Handsfree Answerback Calls on Hold
➤ Press
+2/'
. The Line or [DN] LED flashes green at the on-hold
rate.
You hear recall tone when your station is idle (or two
times only when busy) if you do not retrieve the held
call before “Hold the recall” time set in system
programming expires.
1. Press WDON or the
flashing [DN] to
answer the call.
You are connected to the incoming call.
2. Press +2/' . The Line or [DN] LED flashes green at the on-hold
rate.
You hear recall tone when your station is idle (or two
times only when busy) if you do not retrieve the held
call before “Hold the recall” time set in system
programming expires.