Toshiba DKT2104-CT - Manual (Page 64)

Features
Call Waiting
52
Strata DKT2104-CT Cordless Digital Telephone 5/00
Call Waiting
Call Waiting places an incoming call in queue and alerts you with a warning tone. The
[DN] or Line LED flashes at the on-hold rate.
Direct Station Selection Buttons (Hotline)
This optional feature connects you directly to another station [PDN] by pressing a
Direct Station Selection (DSS) button. If connected to a CO Line, press
'66 to put
the outside party on hold. Transfer the call, as you would normally, by voice
announcing, camping on, hanging up, by pressing
5HOHDVH DQG $QV .
If the station’s [PDN], [SDN], [PhDN], or CO Line DSS LED is lit, it could be busy or
in DND mode. If a station is idle but other stations are using all of its [PDNs], the DSS
button also is lit.
1. If you are talking,
press +2/'
...or the flashing
[DN] The call you are on is placed on hold and you are
connected to the waiting call. The [DN] or Line LED
lights steady.
or /LQH if your
telephone has the
Auto Hold feature
See your System Administrator to find out if you have
Auto Hold.
...or the ringing [DN]
or
/LQH
This disconnects the current call and then connects
you to the transferred call. The [DN] or Line LED
remains steady.
...or WDON . The existing call is disconnected. The camped-on line
rings your telephone and the Line LED flashes at the
incoming call rate.
2. Press a [DN], then
/LQH
...or WDON again.