Toshiba DKT2104-CT - Manual (Page 89)

Features
Two (Tandem) Line Connection
Strata DKT2104-CT Cordless Digital Telephone 5/00
77
Note Both /LQHV or 3RROHG /LQH *USV must appear on your telephone.
➤ To supervise a tandem call and release it
1. Press &1)751 . You hear dial tone, and the Line LED flashes at the
conference rate. The new Line LED lights steady.
2. Press another /LQH
and input a telephone
number.
The Line LEDs light steady and all parties are
conferenced.
3. Press &1)751
after the party
answers.
...or if you get a busy/
no answer, press
/LQH .
You are returned to the original call.
4. Press &1)751 . You hear dial tone. The Line LEDs flashes at the
exclusive hold rate and the LED lights steady. Both
Line LEDs continue to flash at the exclusive hold rate
and the two lines are connected. The LED turns off.
5. Press WDON . If the public telephone company provides auto
disconnect, the connection may release automatically
when the parties hang up. If not, the lines must be
supervised to be disconnected.
1. Press [DN] or
/LQH
. You are connected to both lines and both Line LEDs
light steady.
2. Press WDON if the
parties have hung up
Both Line LEDs turn off and the connection is
released.
...or &1)751 and
hang-up if the parties
are still talking.