Toshiba DKT2104-CT - Manual (Page 43)

Handset Operation
Calling the Attendant Console
Strata DKT2104-CT Cordless Digital Telephone 5/00
31
Calling the Attendant Console
There are three ways to call the Attendant Console depending upon system
programming. You can call any Attendant Console, a particular Attendant Console, or
all Attendant Consoles.
Any Console
➤ Press a [DN] + 0. The call rings the Attendant Console. Dial 0 calls rotate between
the consoles if more than one console is installed.
Specific Console
Emergency Calls to All Consoles
➤ Press [DN] + #400. The call rings all consoles Emgr.
Using CO Line Access Codes
➤ Press a [DN] + the
console’s [DN]
______. The call rings the console ,Q'1 .
Note Your System Administrator can provide the
Attendant Console [DNs].
1. Press
WDON
...or a [DN].
You hear internal dial tone and the LED lights steady
(with INT/PDN automatic off-hook selection
programmed).
2. Enter a CO Line
access code.
See “Access Codes” on Page 83 . You hear CO Line
dial tone and the LED continues to flash at the in-use
rate.