Toshiba DKT2104-CT - Manual (Page 74)

Features
Message Waiting
62
Strata DKT2104-CT Cordless Digital Telephone 5/00
[PhDN/MW] Message Waiting
To use this feature, your telephone must be programmed for both [PhDNs] and MW.
Your telephone has one built-in
06*
that works with your [PDN].
Cancel the Message Waiting Light
1. Press the [PhDN/
MW] indicated by the
flashing red LED
Your telephone rings the station or voice mail device
that left the message. The LED on your telephone
continues to flash.
...or WDON . If there is
no answer, hang up
and try at a later
time.
2. Press WDON after
receiving the
message.
If you have more than one MW indication from
different sources, the red LED continues to flash, after
you answer the first message.
3. Repeat Steps 1 and 2
to answer the next
messages.
1. Press the [PhDN]
associated with the
flashing.
You hear a steady dial tone and the [PhDN] LED
lights steady.
2. Enter . The dial tone stops.
3. Press WDON . The flashing MSG LCD stops and the message is
canceled.