Setting station run times 21 – Toro GREENKEEPER 212 User Manual
Page 22
Turn the control dial to the
STATION TIMES
position.
Check the
PROGRAMS
switch setting. If necessary,
reposition the switch to select the desired program.
Station number 1 will be flashing and its current run
time or OFF will be shown. To select a different sta-
tion number, press the
+/
ON
or
–/
OFF
button until the
desired station number is flashing.
Press the
NEXT
button. The run time (or OFF) will
begin flashing.
To set the run time, press the
+/
ON
or
–/
OFF
button
until the desired run time is shown.
Note: To remove the run time, select OFF by press-
ing the
+/
ON
and
–/
OFF
buttons at the same time.
Press the
NEXT
button. The next station number will
begin flashing.
7. Repeat steps
and
as needed to set, change,
or remove the run time for the remaining stations.
8. To set the station run time for another program,
repeat all of the steps starting at step
.
Return the control dial to the
RUN
position.
Setting Station Run Times
21
PGM A
1 2 3 4 5 6
3
5
3
5
9
4
3
5
2
1
4
2
5