Toro GREENKEEPER 212 - Manual (Page 17)

16
Note: To select the 24-hour clock mode, see page 14.
Turn the control dial to the CURRENT TIME / DAY
position (the hour digits will begin flashing).
To adjust the display, press the +/ ON button to scroll
the digits forward or the –/ OFF button to scroll the
digits backward.
Note: The display will begin to change rapidly if either
button is held down for more than two seconds.
Press the NEXT button to select the next portion of
the display.
4. Repeat step 2 and 3 to set the current minutes.
Note: If the Odd/Even Jumper is removed, the current
year, month and day must be set. Continue at step 7 for
this procedure. If this option is not selected, set the cur-
rent day by continuing at step 5. Refer to Example 1.
To set the current day, press the +/ ON button to
scroll forward or the –/ OFF button to scroll backward
until the current weekday is displayed.
The weekday abbreviations are as follows:
SU (Sunday) MO (Monday)
TU (Tuesday) WE (Wednesday)
TH (Thursday) FR (Friday) SA (Saturday)
When the current time and day are displayed, return
the control dial to the
RUN position.
To adjust the display, press the +/ ON button to scroll
the digits forward or the –/ OFF button to scroll the
digits backward. Refer to Example 2.
Press the NEXT button to select the next portion of
the display.
9. Repeat steps 7 and 8 to set the current month (first
two digits) and the day (second two digits).
When the current time and date are set, return the
control dial to the
RUN position.
Setting the Current Time and Day or Date
Programming the Controller
SU
SU
7
10
8
7
7
7
8
Example 1
Example 2
Day
Month