Setting up the phaser 600 gx driver – Tektronix Phaser 600 User Manual
Page 91
M
A C I N T O S H
S O F T W A R E
7 5
Setting up the Phaser 600 GX driver
Note
Use the Phaser 600 GX driver if you are using Apple Macintosh QuickDraw GX.
QuickDraw GX does not work with non-QuickDraw GX printer drivers. To print from non-QuickDraw GX
applications with a driver such as the LaserWriter 8, disable QuickDraw GX.
For more information on this driver, refer to
Using the Phaser 600 GX Driver
1.
After installing the printer’s software, including the
Phaser 600 GX Driver
(
), open the
Chooser
from the
Apple
menu.
2.
Select the
Phaser 600 GX
driver icon.
3.
Click on the
Zone
for your printer. See your network administrator if you have questions.
4.
Click on your printer in the list of printers in the
Chooser
.
5.
In the
Connect via
field’s pop-up menu, select your printer’s communication method:
■
AppleTalk optionStandard network connection
■
Servers option Selects a shared desktop printer
6.
Click the
Phaser 600
printer
in the list of printers in the
Chooser
.
7.
Click
Create
(to create a desktop printer). An icon of the printer appears on the desktop with
the same name as the printer selected in the
Chooser
.
8.
Close the
Chooser
.