Tektronix Phaser 600 User Manual

Page 626

Y M P T O M S

A N D

S O L U T I O N S

6 0 9

Printer doesn’t
appear in the

Chooser

(Macintosh)

Try another network connection.

Try printing from another computer.

Make sure that the printer is turned on and the cables are correctly attached.

Check the termination (refer to the documentation for your network adapter or
connector for information on termination).

If you have changed the printer’s name, make sure that you have given it a
unique name (not the same as any other printer in the zone or on the
network).

Make sure that the correct network zone is selected in either the

Network

Control Panel

or the

AppleTalk Control Panel

in System 7.5.3 or later.

For network-connected printers:

Problems may occur when double-spooling occurs or banner pages are
specified. Refer to Tektronix’ on-line documentation or contact your network
administrator for more help on troubleshooting your specific type of network.

If you can’t make a print (cont'd.)

Symptom

Solution