Tektronix Phaser 600 - Manual (Page 503)

C O N N E C T I N G A S C S I H A R D D I S K
4 8 7
Important guidelines
When connecting a hard disk to the printer, follow these guidelines:
■ The printer can support up to six external disks, or four disks and one
Copystation.
■ You must turn on the disk(s) before you turn on the printer. Wait at least
one minute after turning on the disk(s) before turning on the printer.
■ Terminators:
■
The printer must always be at one end of the chain with a terminator at
the other end (or a terminated device such as the Phaser Copystation).
■
The printer has an internal terminator.
■ SCSI ID numbers:
■
With multiple disks, each disk must have a unique SCSI ID number. Do
not turn on the printer or disk
until each disk has a unique number .
■
The printer’s SCSI number is 7 , and the internal disk is number 4 .
Valid ID numbers for the external disk are 0 , 1 , 2 , 3 , 5 and 6 .