Setting up a postscript driver for windows nt 3.5 – Tektronix Phaser 600 User Manual

Page 74

P C / W

I N D O W S

S O F T W A R E

5 8

Setting up a PostScript driver for Windows NT 3.5 and 3.51

Note

The Windows NT driver does not support the PhaserMatch application. Refer to

for information on drivers that do.

You may need your original Windows NT setup diskettes (or CD-ROM) to complete this procedure.

If your computer has an Intel-compatible processor, such as the Intel I386, go on to Step

If your computer is a MIPS, Alpha, or PowerPC, edit the

PRINTER.INF file (located in the

WIN95_95 directory on the printer’s CD-ROM or in the top level of the Windows 95/NT diskette).

Copy these files to a new, formatted diskette,

placing them at the top (root) level of the

new diskette.

TEK1

PRINTER.INF
TKPH6001.PPD

Standard configuration

TKP600P1.PPD

Extended Features option

Note

Press and hold down the printer’s

button on the front panel for configuration information.

Open the copy of the

PRINTER.INF file on the new diskette in a text editor such as Notepad.

Locate the following section in the

PRINTER.INF file:

[ProductType]

STF_PLATFORM = I386