Tektronix Phaser 600 - Manual (Page 625)

S Y M P T O M S A N D S O L U T I O N S
6 0 8
If you can’t print
from Windows to
an LPT port
(cont’d.) Check the printer’s language mode
1. Print a copy of the printer’s configuration page to see the language mode
on each port. Refer to Printing the configuration page .
2. If the printer port you are using has the wrong language set for the type of
application you are using, send one of the following utility files to the printer:
■ To print PostScript files, use the PSCRIPT.PS file to set up a port to receive
PostScript; see Printing PostScript files or World Wide Web for details.
■
To print HP-GL files, use the HPGL.PS file to set up a port to receive HP-GL;
see Printing HP-GL files or World Wide Web for details.
■ To print PostScript or HP-GL files, use the AIS.PS file to set up a port for
automatic language selection; see Enabling automatic language selection or
World Wide Web.
If you can’t make a print (cont'd.)
Symptom Solution