Tektronix Phaser 600 - Manual (Page 569)

O C C A S I O N A L C L E A N I N G
5 5 3
Fuser shuttle and exit rollers
When you notice ink offsetting (most
often occurring when fusing is turned
on), or ink smears (most often
occurring when fusing is turned off) on
your prints, you can do the following:
■ Clean the fuser shuttle and fuser
wheel.
■ Replace the fuser components.
■ Clean the exit rollers.
The fuser kit (order number 016-1472-00) contains these replaceable parts:
1 2 foam oiler wheels : Replace when you replace the fuser wheel.
2 2 fuser wheels : Replace after printing 100-200 E-size (34 x 44 in.) sheets
(approximately 100-200 m/300-600 ft. of 36-inch wide media roll).
3 2 cutters : Replace if paper cuts appear jagged or your printer experiences
exit jams due to the cutter.
9480-68
1 2 3