Quantum Sun StorEdge L100 - Manual (Page 84)

Chapter 3 Changing the Library Configuration
Setting the Date
68 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
The hour setting is highlighted.
4 Use the Up or Down buttons to select the correct hour setting.
5 Press Select .
The minute setting is highlighted.
6 Use the Up or Down buttons to select the correct minute setting.
7 Press Select .
The seconds setting is highlighted.
8 Use the Up or Down buttons to select the correct seconds
setting.
9 Press Select .
10 Press Main to return to the main screen.
Setting the Date
3
To set the date:
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Date is highlighted.
3 Press Select .
The day setting is highlighted.
4 Use the Up or Down buttons to select the correct day of the
month.
5 Press Select .
The month setting is highlighted.
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.