Figure 58 opening the tape cartridge door – Quantum Sun StorEdge L100 User Manual
Page 178
Appendix C DLTtape Cartridge Maintenance
Visual Inspection of DLTtape Cartridges
162
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
5
Gently press the hub, then release it. Make sure the hub springs
back into place and is still centered within its circular opening.
6
Open the tape cartridge door (see
a
Gently press up on the tab at the right side of the tape
cartridge door.
b
Swing the door open.
Figure 58 Opening
the Tape Cartridge
Door
7
Verify that:
• The tape is wound tightly on the reel
• The tape leader loop is sticking up about an eighth of an
inch
• The tape leader loop is not bent or torn
8
Check for proper operation of the tape cartridge’s write-protect
Caution:
If any of the above conditions are not met, do not
use the cartridge.
Tape
cartridge
door
Tab