Quantum Sun StorEdge L100 - Manual (Page 80)

Chapter 3 Changing the Library Configuration
Changing the Illumination Setting
64 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Illumination Setting
3
The Illumination option allows you to turn the interior illumination
of the library on or off. This illumination allows you to view the
robotics easily through the viewing window.
To enable or disable
Illumination :
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Illumination is highlighted.
3 Press Select .
4 Use the Up or Down buttons to select the desired Illumination
setting. The available settings are Enabled and Disabled .
5 Press Select .
To return to the Configuration screen without changing the
option setting, press Cancel .
6 Press Main to return to the main screen.
Note: The default setting is Enabled .
Caution: If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.