Quantum Sun StorEdge L100 - Manual (Page 58)

Chapter 2 Basic Operations
Removing the Magazines
42 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
2 Press the button corresponding to the magazine access door
you want to open:
• To release the top left magazine access door, press
1 .
• To release both left magazine access doors, press 1 & 2 .
• To release the right magazine access door, press 3 .
• To release all the magazine access doors, press All .
3 Press the white button next to the desired magazine access
door and open the door.
4 Grasp the handle at the front of the desired magazine and pull
it forward and out of the library.
5 When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine
access door.
6 On the Release Magazines screen, press Re-Lock .
The library locks the magazine access doors and inventories
the magazines. When the inventory is complete, the GUI
displays the main screen.
Removing a Magazine when the L100 Library is Powered Down 2
To remove a magazine when the library is powered down:
1 Look through the viewing window and verify that all
cartridges are fully seated either in a magazine slot or in the
robotic hand.
Note: If you are opening the bottom left magazine access
door, open the top left magazine access door first.
Caution: You can damage the library severely if you try to
remove a magazine when one of the data
cartridges is not fully seated.