Figure 25 magazine release button, Removing a magazine when the l25 library is, Powered down – Quantum Sun StorEdge L100 User Manual
Page 56
Chapter 2 Basic Operations
Removing the Magazines
40
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Removing a Magazine when the L25 Library is Powered Down
2
To remove a magazine when the library is powered down:
1
Look through the viewing window and verify that all
cartridges are fully seated either in a magazine slot or in the
robotic hand.
2
Press the white button next to the magazine access door.
The magazine access door opens.
3
To remove the left magazine:
a
Using a slender object such as a pen, press and hold the
magazine release button (see
).
b
Grasp the handle at the front of the left magazine and slide
it forward and out of the library.
Figure 25 Magazine
Release Button
Caution:
You can damage the library severely if you try to
remove a magazine when one of the data
cartridges is not fully seated.
Magazine
release
button