Olympus C-2100 - Manual (Page 89)

89
MANUAL MODE
1 Set the mode dial to “M”.
●
The aperture and the shutter speed
appear on the display.
2 Press on the Arrow
pad to select the aperture and the
shutter speed.
: Increases the aperture
: Decreases the aperture
: Makes faster the shutter speed
: Makes slower the shutter speed
●
If you set the Mode dial to “M” when the ISO speed is set to AUTO, ISO
speed is set to 100 automatically.
●
Unless OFF is selected in “All Reset”, the setting will be canceled and reset
to off when the power is turned off. (p.148)
Note:
You can set the aperture and the shutter speed manually in the Manual
mode. To check the exposure, refer to the exposure differential on the
display.
૽૽
Aperture differential
●
The difference (ranging from –3.0 to
+3.0) between the exposure determined
by the currently selected aperture and
shutter speed compared to the exposure
level considered optimal by the camera
appears in the upper right-hand corner
on the screen.
●
When is pressed, the aperture
differential appears at the bottom of the
screen indicated with the bar. Pressing
the Shutter button halfway allows you to
stop the indicator on the bar when the
exposure differential is determined by
the camera.
●
When the exposure is set to less than
–3.0 or more than +3, the aperture
differntial appears in red on the display.
Aperture
Shutter speed
Aperture
differential
2
1
M F2.8 1/800 –3.0
M F2.8 1/800
When the bar is displayed