Olympus C-2100 - Manual (Page 187)

187
USB connector
Serial connector (RS-232C)
4 Connect the cable to the camera’s USB connector or serial jack.
5 Turn on the computer.
6 Set the camera’s Mode dial to .
7 Start CAMEDIA Master on the computer.
●
If the camera is connected to the computer with the camera turned on, the
camera may not function properly. When connecting to the computer, make
sure the camera is turned off.
●
When connecting to the computer, the buttons on the camera do not
function.
●
When the camera is connected to a TV or Personal computer,
communication is not possible.
●
In order to prevent battery consumption, use the AC adapter (optional).
Note:
●
The first time you connect your camera to your personal computer with the
USB connector, you will need the CAMEDIA Master CD-ROM to install a
file transfer driver. To install the driver, be sure to read the CAMEDIA
Master installation guide.