Olympus C-2100 - Manual (Page 134)

134
RECORDING—color/image quality
Adjusting the Color ~ White Balance
Color reproduction differs depending on the lighting conditions. You can
adjust the white balance to match the lighting conditions and assure natural
looking colors. Settings for tungsten and fluorescent lights are also available,
allowing you to get better results indoors.
1 Press .
●
The Menu screen appears.
2 Press on the Arrow pad and
select "WB", then press .
3 Press and select a setting
item (see below), then press the
OK button.
●
Setting Items:
AUTO,
(Daylight),
(Overcast),
(Tungsten Light) or
(Fluorescent).
●
If the OK button is pressed again,
the setting is stored and the Menu
screen disappears. The normal
screen comes back on.
●
When any setting except Auto is
selected, "WB" appears in the con-
trol panel.
2, 3
3
1
●
Set to Auto for most shooting conditions.
●
Under certain lighting conditions, Auto may not be suitable.
●
When ALL RESET is off (p.148), current settings are retained even when
the power is turned off.
●
Make sure you check the color with the image displayed.
Note:
[ 1 / 5 ]
F2.8 1/800 0.0 P
ISO
WB
DIGITAL
ZOOM
AUTO
Manual White Balance Mark
Still Picture Recording menu