Olympus C-2100 - Manual (Page 159)

159
Setting the Times for Power Saving Mode ~
SLEEP
●
Time settings cannot be set for Record mode and Display mode simultane-
ously. Set the time for each mode separately.
●
Time settings remain in effect until you change them.
●
"SLEEP" will not work when using an AC adapter,
●
If a Slide-Show is displayed for more than 30 minutes, the camera will auto-
matically go to sleep.
Note:
The camera will automatically switch to Power Saving Mode (SLEEP) if the
time you set has passed with no operations. This function can be disabled
(OFF).
Time settings can be selected for Record mode (P. A. S. M. S-Prg.
) and
Display mode ( ) separately.
1 Display the mode setting screen -
See "How to use the Mode Setting
Menu Screen 1~3" (P.145).
2 Press to select "SLEEP",
then press .
3 Press to select a time set-
ting (see below), then press the
OK button to set your selection.
Time Settings: OFF. 30SEC. 1MIN.
2MIN. 5MIN.
4 Press the OK button repeatedly
until the menu disappears.
2, 3
3, 4
[ 2 / 3 ]
REC VIEW
AF ILLUMNATOR
SLEEP
HIGH
ON
OFF
1MIN
Still picture recording mode setting menu
[ 2 / 3 ]
OFF
30SEC
1MIN
2MIN
5MIN
REC VIEW
AF ILLUMNATOR
SLEEP