Olympus C-40Zoom - Manual (Page 179)

179
Chapter 10
1 Make sure the camera’s card access
lamp is off.
2 Drag & drop the “Untitled” icon onto
the “Trash” icon on your desktop, or
select "Eject" from the “Special”
menu.
3 Make sure the camera’s access
lamp is off, then remove the USB
cable.
Macintosh
Disconnecting the USB cable
Windows 98/98 SE
1 Make sure the camera’s card access
lamp is off.
2 Select the “Removable Disk” icon
on “My Computer” and right-click to
display the menu.
3 Select “Eject” and left-click.
4 Make sure the camera’s access
lamp is off, then remove the USB
cable.
OK
Card access lamp
To avoid computer malfunctions, always do the following when removing the
USB cable. If a malfunction occurs, disconnect the USB cable and re-connect
it and/or re-start your personal computer.