Erasing pictures, Single-frame erase 134, Chapter 7 – Olympus C-40Zoom User Manual
Page 134: Single-frame erase
134
Chapter 7
Erasing Pictures
Recorded pictures can also be erased. This can be done either one frame at
a time or to all the pictures in the card.
● It is not possible to erase protected pictures or pictures stored on a card
that has a write-protect seal.
● Once erased, pictures cannot be restored.
1
Select a picture you wish to erase by using the arrow pad.
● If the picture is protected, cancel the protection (P. 133).
2
Press the
(erase) button.
● The
ERASE screen is displayed.
3
Press
Ñ
to select YES.
4
Press
to erase the picture.
● To cancel erasing, select NO in step 3 and press
, or press the
button
again.
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
Single-Frame Erase
ERASE
YES
YES
N O
SELECT
GO
ERASE screen