Olympus C-40Zoom - Manual (Page 13)

13
Control panel indications
1
Flash intensity control (P. 89)
● Displayed when the amount of the light emitted by the flash is adjusted.
2
Spot metering mode (P. 91)
● Displayed when the Spot metering mode is set.
3
Self-timer (P. 93)
● Displayed when the self-timer is activated.
4
Sequential shooting (P. 96)
● Displayed when the drive mode is set to Sequential shooting or AF
Sequential shooting.
5
Remote control (P. 94)
● Displayed when remote control shooting is activated.
6
White balance (P. 112)
● Displayed when the White balance is set to any mode except AUTO.
7
ISO (P. 110)
● Displayed when the ISO is set to any mode except AUTO.
8
Card error (P. 32, 193, 194)
● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
9
Card writing
● Displayed when recorded pictures are being written to a card.
0
Record mode (P. 105) (TIFF, SHQ, HQ, SQ1, SQ2)
● Displays the record mode. If SHQ or HQ is set to ENLARGE SIZE, the
corresponding indication blinks.
!
Macro mode (P. 92)
● Displayed when the macro mode is engaged.
@
Manual Focus (P. 73)
● Displayed when locking focus using the Manual focus function.
1
!
@
2 3 678 9 4 5
0
#
$ % ^ & *
Names of parts