Olympus C-40Zoom - Manual (Page 150)

150
Chapter 8
Power on/off display setting
You can select a picture and/or sound to display/output when the power is
turned on/off. It is also possible to register your favorite picture for display
when the power is turned on/off (P. 151). To select the already registered
picture, select “2” in SCREEN. The sound volume is the same level as
selected in the VOLUME setting (P. 131).
PW ON SETUP: Selects the picture and/or sound that will be displayed/
output when the power is turned on.
PW OFF SETUP: Selects the picture and/or sound that will be displayed/
output when the power is turned off.
1 In the top menu, select MODE MENU T SETUP T PW ON (PW OFF)
SETUP. Press
í
.
● The PW ON (PW OFF) SETUP screen appears.
2 Press
Ññ
to select SCREEN or
SOUND, then press
í
.
3 Press
Ññ
to select OFF, “1” or “2”,
then press .
● In the
mode, this function's setting is the same as that selected in the
other shooting modes.
● If the battery check indication appears when the power is turned off, the
shutdown image may not appear.
SCREEN
OFF : There is no picture.
1
: Factory default setting
2 : Selects the already registered picture. If “2” is selected, but there is
no picture registered, the monitor will show a blue screen. Once a
picture has been registered, the monitor will display the registered
picture and not the blue screen.
SOUND
OFF : There is no startup/shutdown sound.
1
: Factory default setting
2 : Another sound type
PW ON SETUP PW ON SETUP
CANCEL SELECT GO
SCREEN
1
OFF
2
SOUND